咨询热线：020-82315523 18988993510 18988993505
服务中心
服务器开启共享功能,电脑开启共享功能,一建bat命令行开启系统共享功能
文章来源：迅恒云计算2024-03-02 07:12:26浏览次数：
一键开启共享功能，将下面的保存为bat执行即可：
| @echo off :wwwpiiscn cls mode 76, 32 title 开启或关闭共享、Windows更新等功能 echo: echo: echo: echo 【注意:开启共享会存在安全问题,用不上共享或不是域环境请关闭共享】 echo ____________________________________________________________ echo: echo [1] 开启系统共享功能【可能需重启后生效】 echo: echo [2] 关闭系统共享功能【可能需重启后生效】 echo ____________________________________________ echo: echo [3] 开启或关闭系统更新功能 echo ____________________________________________ echo: echo [4] 开启或关闭系统显示缩略图【重启后生效】 echo ____________________________________________ echo: echo [5] 开启打印机服务 [6] 关闭打印机服务 echo: echo [7] 打开打印机共享端口[打印机不共享请勿打开] echo ____________________________________________ echo: echo [8] 安装Active Directory域控制器 echo: echo [9] 作为客户机加入域开放端口[无需装域控] echo ____________________________________________ echo: echo [0] 退出 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,3,4,5,6,7,8,9,0] choice /C:1234567890 /N if errorlevel==10 exit /b if errorlevel==9 goto :ActiveDirectoryPort if errorlevel==8 goto :openActiveDirectory if errorlevel==7 goto :openPrintPort if errorlevel==6 goto :closePrint if errorlevel==5 goto :openPrint if errorlevel==4 goto :thumbnail if errorlevel==3 goto :windowsupdate if errorlevel==2 goto :closeSharing if errorlevel==1 goto :openSharing :openSharing cls mode 110, 34 title 开启共享功能[可能需要重启服务器] echo: echo 开启共享会使得系统不安全,用不上共享或非域环境请关闭共享 echo ____________________________________________________________ echo: echo [1] 开启系统共享功能【可能需重启后生效】 echo: echo [2] 关闭系统共享功能【域环境中不要关闭】 echo ____________________________________________ echo: echo [0] 返回 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,0] choice /C:120 /N if errorlevel==3 goto :wwwpiiscn if errorlevel==2 goto :closeSharing if errorlevel==1 goto :openSharing2 :openSharing2 cls mode 110, 34 title 开启共享功能[可能需要重启服务器] echo 开启Server,TCP/IP NetBIOS Helper,Workstation三个服务 sc config LanmanServer start= auto net start LanmanServer sc config lmhosts start= auto net start lmhosts sc config LanmanWorkstation start= auto net start LanmanWorkstation netsh advfirewall set allprofiles state on rem 开启Windows系统自带的防火墙,on为开启,而off为关闭 netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放打印机TCP端口" netsh advfirewall firewall delete rule name="开放打印机UDP端口" netsh advfirewall firewall delete rule name="关闭高危险TCP端口" netsh advfirewall firewall delete rule name="关闭高危险UDP端口" netsh advfirewall firewall delete rule name="关闭危险TCP端口" netsh advfirewall firewall delete rule name="关闭危险UDP端口" netsh advfirewall firewall delete rule name="关闭TCP1025端口" netsh advfirewall firewall delete rule name="关闭TCP1211端口" netsh advfirewall firewall delete rule name="关闭TCP135端口" netsh advfirewall firewall delete rule name="关闭TCP137-139端口" netsh advfirewall firewall delete rule name="关闭TCP1720端口" netsh advfirewall firewall delete rule name="关闭TCP3001-3003端口" netsh advfirewall firewall delete rule name="关闭TCP3095-3097端口" netsh advfirewall firewall delete rule name="关闭TCP389端口" netsh advfirewall firewall delete rule name="关闭TCP445端口" netsh advfirewall firewall delete rule name="关闭TCP464端口" netsh advfirewall firewall delete rule name="关闭TCP593端口" netsh advfirewall firewall delete rule name="关闭TCP636端口" netsh advfirewall firewall delete rule name="关闭TCP88端口" netsh advfirewall firewall delete rule name="关闭UDP1211端口" netsh advfirewall firewall delete rule name="关闭UDP135端口" netsh advfirewall firewall delete rule name="关闭UDP137-139端口" netsh advfirewall firewall delete rule name="关闭UDP445端口" netsh advfirewall firewall add rule name="开放共享和域的TCP端口" dir=in action=allow protocol=TCP localport="53,88,135,137-139,389,445,464,636,873,1026,3268-3269,49152-65535" netsh advfirewall firewall add rule name="开放共享和域的UDP端口" dir=in action=allow protocol=UDP localport="53,88,123,135,137-139,389,445,464" netsh advfirewall firewall add rule name="关闭危险TCP端口" dir=in action=block protocol=TCP localport="593,1025,1720,3001-3003,3095-3097,11211" netsh advfirewall firewall add rule name="关闭危险UDP端口" dir=in action=block protocol=UDP localport="11211" netsh ipsec static delete all rem 删除IP安全策略中的所有的策略、规则、筛选器列表、筛选器、筛选器动作等 netsh ipsec static add policy name=IDC数据中心安全策略 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=593 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1720 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1025 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3001 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3002 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3003 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3095 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3096 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3097 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filteraction name=阻止 action=block netsh ipsec static add rule name=关闭端口 policy=IDC数据中心安全策略 filterlist=关闭端口 filteraction=阻止 netsh ipsec static set policy name=IDC数据中心安全策略 assign=y echo 恢复文件夹右键共享功能菜单 reg add "HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Directory\background\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\LibraryFolder\background\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\UserLibraryFolder\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f echo 如果系统原来没安装SMB1.0功能,可能需要重启服务器 echo 如果没有提示重启服务器,请勿重启 echo 请耐心等待安装共享需要的SMB1.0功能… powershell Enable-WindowsOptionalFeature -Online -FeatureName SMB1Protocol pause goto :wwwpiiscn :closeSharing cls mode 110, 34 title 关闭共享功能[可能需要重启服务器] echo 关闭Server和TCP/IP NetBIOS Helper服务 net stop LanmanServer /y sc config LanmanServer start= disabled net stop lmhosts /y sc config lmhosts start= disabled netsh advfirewall set allprofiles state on rem 开启Windows系统自带的防火墙 netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放打印机TCP端口" netsh advfirewall firewall delete rule name="开放打印机UDP端口" netsh advfirewall firewall delete rule name="关闭高危险TCP端口" netsh advfirewall firewall delete rule name="关闭高危险UDP端口" netsh advfirewall firewall delete rule name="关闭危险TCP端口" netsh advfirewall firewall delete rule name="关闭危险UDP端口" netsh advfirewall firewall delete rule name="关闭TCP1025端口" netsh advfirewall firewall delete rule name="关闭TCP1211端口" netsh advfirewall firewall delete rule name="关闭TCP135端口" netsh advfirewall firewall delete rule name="关闭TCP137-139端口" netsh advfirewall firewall delete rule name="关闭TCP1720端口" netsh advfirewall firewall delete rule name="关闭TCP3001-3003端口" netsh advfirewall firewall delete rule name="关闭TCP3095-3097端口" netsh advfirewall firewall delete rule name="关闭TCP389端口" netsh advfirewall firewall delete rule name="关闭TCP445端口" netsh advfirewall firewall delete rule name="关闭TCP464端口" netsh advfirewall firewall delete rule name="关闭TCP593端口" netsh advfirewall firewall delete rule name="关闭TCP636端口" netsh advfirewall firewall delete rule name="关闭TCP88端口" netsh advfirewall firewall delete rule name="关闭UDP1211端口" netsh advfirewall firewall delete rule name="关闭UDP135端口" netsh advfirewall firewall delete rule name="关闭UDP137-139端口" netsh advfirewall firewall delete rule name="关闭UDP445端口" netsh advfirewall firewall add rule name="关闭危险TCP端口" dir=in action=block protocol=TCP localport="593,1025,1720,3001-3003,3095-3097,11211" netsh advfirewall firewall add rule name="关闭危险UDP端口" dir=in action=block protocol=UDP localport="11211" netsh advfirewall firewall add rule name="关闭高危险TCP端口" dir=in action=block protocol=TCP localport="88,135,137-139,389,445,464,636" netsh advfirewall firewall add rule name="关闭高危险UDP端口" dir=in action=block protocol=UDP localport="88,135,137-139,389,445,464,636" netsh ipsec static delete all rem 删除IP安全策略中的所有的策略、规则、筛选器列表、筛选器、筛选器动作等 netsh ipsec static add policy name=IDC数据中心安全策略 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=137 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=137 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=138 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=138 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=139 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=139 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=445 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=445 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=593 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1720 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1025 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3001 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3002 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3003 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3095 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3096 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3097 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filteraction name=阻止 action=block netsh ipsec static add rule name=关闭端口 policy=IDC数据中心安全策略 filterlist=关闭端口 filteraction=阻止 netsh ipsec static set policy name=IDC数据中心安全策略 assign=y echo 删除右键共享菜单 reg delete "HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers\ModernSharing" /va /f reg delete "HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers\Sharing" /va /f reg delete "HKEY_CLASSES_ROOT\Directory\background\shellex\ContextMenuHandlers\Sharing" /va /f reg delete "HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing" /va /f reg delete "HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing" /va /f reg delete "HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing" /va /f reg delete "HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing" /va /f reg delete "HKEY_CLASSES_ROOT\LibraryFolder\background\shellex\ContextMenuHandlers\Sharing" /va /f reg delete "HKEY_CLASSES_ROOT\UserLibraryFolder\shellex\ContextMenuHandlers\Sharing" /va /f reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*\shellex\ContextMenuHandlers\Sharing" /va /f rem 下面三是Win11和Win2025另有的共享功能项 reg delete "HKEY_CLASSES_ROOT\AllFilesystemObjects\shellex\ContextMenuHandlers\ModernSharing" /va /f reg delete "HKEY_CLASSES_ROOT\MSGraphDocument\shellex\ContextMenuHandlers\ModernSharing" /va /f reg delete "HKEY_CLASSES_ROOT\MSGraphDocument_38664959\shellex\ContextMenuHandlers\ModernSharing" /va /f echo 如果系统原来安装了SMB1.0功能,可能需要重启服务器 echo 如果没有提示重启服务器,请勿重启 echo 请耐心等待禁用SMB1.0功能… powershell Disable-WindowsOptionalFeature -Online -FeatureName SMB1Protocol pause goto :wwwpiiscn :windowsupdate cls mode 110, 34 title 开启或关闭Windows更新功能 echo: echo 开启或关闭Windows更新功能 echo ____________________________________________________________ echo: echo [1] 开启Windows更新功能 echo: echo [2] 关闭Windows更新功能 echo ____________________________________________ echo: echo [0] 返回 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,0] choice /C:120 /N if errorlevel==3 goto :wwwpiiscn if errorlevel==2 goto :closewindowsupdate if errorlevel==1 goto :openwindowsupdate :openwindowsupdate cls mode 110, 34 title 开启Windows更新功能 echo 开启"Windows Update"和"更新Orchestrator服务(Update Orchestrator服务)"2个服务 sc config wuauserv start= auto net start wuauserv sc config UsoSvc start= demand rem 手动demand,禁用disabled,自动auto net start UsoSvc echo: echo: echo 已经开启Windows更新功能,请按任意键返回主菜单… pause>nul goto :wwwpiiscn :closewindowsupdate cls mode 110, 34 title 关闭Windows更新功能 net stop wuauserv /y sc config wuauserv start= disabled net stop UsoSvc /y sc config UsoSvc start= demand net stop BITS /y sc config BITS start= disabled rem 停止并禁用后台智能传输服务"Background Intelligent Transfer Service",不影响手动更新 echo: echo: echo 已经关闭Windows更新功能,请按任意键返回主菜单… pause>nul goto :wwwpiiscn :thumbnail cls mode 110, 34 title 开启或关闭系统缩略图功能 echo: echo 开启或关闭系统显示缩略图功能 echo ____________________________________________________________ echo: echo [1] 开启系统显示缩略图【重启后生效】 echo: echo [2] 关闭系统显示缩略图【重启后生效】 echo ____________________________________________ echo: echo [0] 返回 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,0] choice /C:120 /N if errorlevel==3 goto :wwwpiiscn if errorlevel==2 goto :closethumbnail if errorlevel==1 goto :openthumbnail :openthumbnail cls mode 110, 34 title 开启系统显示缩略图功能 echo 开启系统显示缩略图【重启后生效】 reg add "HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer" /v "DisableThumbnails" /t REG_DWORD /d 0 /f rem 或者reg delete "HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer" /v "DisableThumbnails" /f echo: echo: echo 已开启系统显示缩略图[重启后生效],请按任意键返回主菜单… pause>nul goto :wwwpiiscn :closethumbnail cls mode 110, 34 title 关闭系统显示缩略图功能 echo 关闭系统显示缩略图【重启后生效】 reg add "HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer" /v "DisableThumbnails" /t REG_DWORD /d 1 /f echo: echo: echo 已关闭系统显示缩略图[重启后生效],请按任意键返回主菜单… pause>nul goto :wwwpiiscn :openPrint cls mode 110, 34 title 开启打印机服务 echo 开启Print Spooler打印机服务 sc config spooler start= auto net start spooler echo: echo: echo 已开启Print Spooler打印机服务,请按任意键返回主菜单… pause>nul goto :wwwpiiscn :closePrint cls mode 110, 34 title 关闭打印机服务 echo 关闭Print Spooler打印机服务 net stop spooler /y sc config spooler start= disabled echo: echo: echo 已关闭Print Spooler打印机服务,请按任意键返回主菜单… pause>nul goto :wwwpiiscn :openPrintPort cls mode 110, 34 title 打开打印机共享端口[打印机不在局域网中共享请勿打开] echo: echo 打印机不在局域网中共享请勿打开 echo ____________________________________________________________ echo: echo [1] 打开打印机共享需要的端口 echo: echo [2] 关闭系统共享功能【含打印机共享】 echo ____________________________________________ echo: echo [0] 返回 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,0] choice /C:120 /N if errorlevel==3 goto :wwwpiiscn if errorlevel==2 goto :closeSharing if errorlevel==1 goto :openPrintPort2 :openPrintPort2 echo 设置Print Spooler打印机服务为自动 sc config spooler start= auto net start spooler netsh advfirewall set allprofiles state on rem 开启Windows系统自带的防火墙 netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放打印机TCP端口" netsh advfirewall firewall delete rule name="开放打印机UDP端口" netsh advfirewall firewall delete rule name="关闭高危险TCP端口" netsh advfirewall firewall delete rule name="关闭高危险UDP端口" netsh advfirewall firewall delete rule name="关闭危险TCP端口" netsh advfirewall firewall delete rule name="关闭危险UDP端口" netsh advfirewall firewall delete rule name="关闭TCP1025端口" netsh advfirewall firewall delete rule name="关闭TCP1211端口" netsh advfirewall firewall delete rule name="关闭TCP135端口" netsh advfirewall firewall delete rule name="关闭TCP137-139端口" netsh advfirewall firewall delete rule name="关闭TCP1720端口" netsh advfirewall firewall delete rule name="关闭TCP3001-3003端口" netsh advfirewall firewall delete rule name="关闭TCP3095-3097端口" netsh advfirewall firewall delete rule name="关闭TCP389端口" netsh advfirewall firewall delete rule name="关闭TCP445端口" netsh advfirewall firewall delete rule name="关闭TCP464端口" netsh advfirewall firewall delete rule name="关闭TCP593端口" netsh advfirewall firewall delete rule name="关闭TCP636端口" netsh advfirewall firewall delete rule name="关闭TCP88端口" netsh advfirewall firewall delete rule name="关闭UDP1211端口" netsh advfirewall firewall delete rule name="关闭UDP135端口" netsh advfirewall firewall delete rule name="关闭UDP137-139端口" netsh advfirewall firewall delete rule name="关闭UDP445端口" netsh advfirewall firewall add rule name="开放共享和域的TCP端口" dir=in action=allow protocol=TCP localport="53,88,135,137-139,389,445,464,636,873,1026,3268-3269,49152-65535" netsh advfirewall firewall add rule name="开放共享和域的UDP端口" dir=in action=allow protocol=UDP localport="53,88,123,135,137-139,389,445,464" netsh advfirewall firewall add rule name="开放打印机TCP端口" dir=in action=allow protocol=TCP localport="9100-9102,9220-9222,9280-9282,9290-9292" netsh advfirewall firewall add rule name="开放打印机UDP端口" dir=in action=allow protocol=UDP localport="105,5353" netsh advfirewall firewall add rule name="关闭危险TCP端口" dir=in action=block protocol=TCP localport="593,1025,1720,3001-3003,3095-3097,11211" netsh advfirewall firewall add rule name="关闭危险UDP端口" dir=in action=block protocol=UDP localport="11211" netsh ipsec static delete all rem 删除IP安全策略中的所有的策略、规则、筛选器列表、筛选器、筛选器动作等 netsh ipsec static add policy name=IDC数据中心安全策略 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=593 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1720 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1025 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3001 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3002 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3003 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3095 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3096 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3097 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filteraction name=阻止 action=block netsh ipsec static add rule name=关闭端口 policy=IDC数据中心安全策略 filterlist=关闭端口 filteraction=阻止 netsh ipsec static set policy name=IDC数据中心安全策略 assign=y echo 恢复文件夹右键共享功能菜单 reg add "HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Directory\background\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\LibraryFolder\background\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_CLASSES_ROOT\UserLibraryFolder\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*\shellex\ContextMenuHandlers\Sharing" /ve /t REG_SZ /d "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}" /f echo 如果系统原来没安装SMB1.0功能,可能需要重启服务器 echo 如果没有提示重启服务器,请勿重启 echo 请耐心等待安装共享需要的SMB1.0功能… powershell Enable-WindowsOptionalFeature -Online -FeatureName SMB1Protocol echo: echo: echo 已打开打印机共享需要的端口,请在共享中手动设置需要共享的打印机 echo 按任意键返回主菜单… pause>nul goto :wwwpiiscn :openActiveDirectory cls mode 110, 34 title 安装Active Directory域控制器 echo: echo 安装Active Directory域控制器 echo ____________________________________________________________ echo: echo [1] 请先开启共享功能[安装AD域前提条件] echo: echo [2] 安装Active Directory域控制器并开放端口 echo: echo [3] AD域控服务器安全加固【执行前2项后再操作】 echo ____________________________________________ echo: echo [0] 返回 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,3,0] choice /C:1230 /N if errorlevel==4 goto :wwwpiiscn if errorlevel==3 goto :ADacceptip if errorlevel==2 goto :openActiveDirectory2 if errorlevel==1 goto :openSharing2 :openActiveDirectory2 cls mode 110, 34 title 安装Active Directory域控制器 echo 开启Active Directory域控制器需要的服务 sc config LanmanServer start= auto net start LanmanServer sc config RemoteRegistry start= auto net start RemoteRegistry sc config lmhosts start= auto net start lmhosts sc config Browser start= auto net start Browser sc config RpcSs start= auto net start RpcSs sc config LanmanWorkstation start= auto net start LanmanWorkstation sc config VSS start= auto net start VSS netsh advfirewall set allprofiles state on rem 开启Windows系统自带的防火墙 netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放打印机TCP端口" netsh advfirewall firewall delete rule name="开放打印机UDP端口" netsh advfirewall firewall delete rule name="关闭高危险TCP端口" netsh advfirewall firewall delete rule name="关闭高危险UDP端口" netsh advfirewall firewall delete rule name="关闭危险TCP端口" netsh advfirewall firewall delete rule name="关闭危险UDP端口" netsh advfirewall firewall delete rule name="关闭TCP1025端口" netsh advfirewall firewall delete rule name="关闭TCP1211端口" netsh advfirewall firewall delete rule name="关闭TCP135端口" netsh advfirewall firewall delete rule name="关闭TCP137-139端口" netsh advfirewall firewall delete rule name="关闭TCP1720端口" netsh advfirewall firewall delete rule name="关闭TCP3001-3003端口" netsh advfirewall firewall delete rule name="关闭TCP3095-3097端口" netsh advfirewall firewall delete rule name="关闭TCP389端口" netsh advfirewall firewall delete rule name="关闭TCP445端口" netsh advfirewall firewall delete rule name="关闭TCP464端口" netsh advfirewall firewall delete rule name="关闭TCP593端口" netsh advfirewall firewall delete rule name="关闭TCP636端口" netsh advfirewall firewall delete rule name="关闭TCP88端口" netsh advfirewall firewall delete rule name="关闭UDP1211端口" netsh advfirewall firewall delete rule name="关闭UDP135端口" netsh advfirewall firewall delete rule name="关闭UDP137-139端口" netsh advfirewall firewall delete rule name="关闭UDP445端口" netsh advfirewall firewall add rule name="开放共享和域的TCP端口" dir=in action=allow protocol=TCP localport="53,88,135,137-139,389,445,464,636,873,1026,3268-3269,49152-65535" netsh advfirewall firewall add rule name="开放共享和域的UDP端口" dir=in action=allow protocol=UDP localport="53,88,123,135,137-139,389,445,464" netsh advfirewall firewall add rule name="开放打印机TCP端口" dir=in action=allow protocol=TCP localport="9100-9102,9220-9222,9280-9282,9290-9292" netsh advfirewall firewall add rule name="开放打印机UDP端口" dir=in action=allow protocol=UDP localport="105,5353" netsh advfirewall firewall add rule name="关闭危险TCP端口" dir=in action=block protocol=TCP localport="593,1025,1720,3001-3003,3095-3097,11211" netsh advfirewall firewall add rule name="关闭危险UDP端口" dir=in action=block protocol=UDP localport="11211" netsh ipsec static delete all rem 删除IP安全策略中的所有的策略、规则、筛选器列表、筛选器、筛选器动作等 netsh ipsec static add policy name=IDC数据中心安全策略 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=593 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1720 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1025 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3001 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3002 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3003 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3095 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3096 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3097 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filteraction name=阻止 action=block netsh ipsec static add rule name=关闭端口 policy=IDC数据中心安全策略 filterlist=关闭端口 filteraction=阻止 netsh ipsec static set policy name=IDC数据中心安全策略 assign=y echo 请耐心等待安装Active Directory域控制器… powershell -command Add-WindowsFeature AD-Domain-Services,RSAT-AD-Tools,RSAT-ADDS,RSAT-AD-AdminCenter,RSAT-ADDS-Tools,RSAT-ADLDS,RSAT-AD-PowerShell,GPMC echo: echo: echo 请手动检查:网络设置-网卡属性-Internet协议版本4(TCP/IP4)-高级-WINS-启用TCP/IP上的NetBIOS echo 正常情况下NetBIOS默认是启动状态 echo 已安装Active Directory域控制器并开放相关端口,请按任意键返回主菜单… pause>nul goto :wwwpiiscn :ActiveDirectoryPort cls mode 110, 34 title 作为客户机加入域环境开放端口[客户机无需装域控] echo: echo 作为客户机加入域环境开放端口 echo ____________________________________________________________ echo: echo [1] 请先开启共享功能[加入AD域前提条件] echo: echo [2] 作为客户机加入域环境开放端口 echo: echo [3] 域成员客户机安全加固【执行前2项后再操作】 echo ____________________________________________ echo: echo [0] 返回 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,3,0] choice /C:1230 /N if errorlevel==4 goto :wwwpiiscn if errorlevel==3 goto :ADacceptip if errorlevel==2 goto :ActiveDirectoryPort2 if errorlevel==1 goto :openSharing2 :ActiveDirectoryPort2 cls mode 110, 34 title 作为客户机加入域环境开放相关端口 echo 开启域客户机所需要的服务 sc config LanmanServer start= auto net start LanmanServer sc config RemoteRegistry start= auto net start RemoteRegistry sc config lmhosts start= auto net start lmhosts sc config Browser start= auto net start Browser sc config RpcSs start= auto net start RpcSs sc config LanmanWorkstation start= auto net start LanmanWorkstation sc config VSS start= auto net start VSS netsh advfirewall set allprofiles state on rem 开启Windows系统自带的防火墙 netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放共享和域的TCP端口" netsh advfirewall firewall delete rule name="开放打印机TCP端口" netsh advfirewall firewall delete rule name="开放打印机UDP端口" netsh advfirewall firewall delete rule name="关闭高危险TCP端口" netsh advfirewall firewall delete rule name="关闭高危险UDP端口" netsh advfirewall firewall delete rule name="关闭危险TCP端口" netsh advfirewall firewall delete rule name="关闭危险UDP端口" netsh advfirewall firewall delete rule name="关闭TCP1025端口" netsh advfirewall firewall delete rule name="关闭TCP1211端口" netsh advfirewall firewall delete rule name="关闭TCP135端口" netsh advfirewall firewall delete rule name="关闭TCP137-139端口" netsh advfirewall firewall delete rule name="关闭TCP1720端口" netsh advfirewall firewall delete rule name="关闭TCP3001-3003端口" netsh advfirewall firewall delete rule name="关闭TCP3095-3097端口" netsh advfirewall firewall delete rule name="关闭TCP389端口" netsh advfirewall firewall delete rule name="关闭TCP445端口" netsh advfirewall firewall delete rule name="关闭TCP464端口" netsh advfirewall firewall delete rule name="关闭TCP593端口" netsh advfirewall firewall delete rule name="关闭TCP636端口" netsh advfirewall firewall delete rule name="关闭TCP88端口" netsh advfirewall firewall delete rule name="关闭UDP1211端口" netsh advfirewall firewall delete rule name="关闭UDP135端口" netsh advfirewall firewall delete rule name="关闭UDP137-139端口" netsh advfirewall firewall delete rule name="关闭UDP445端口" netsh advfirewall firewall add rule name="开放共享和域的TCP端口" dir=in action=allow protocol=TCP localport="53,88,135,137-139,389,445,464,636,873,1026,3268-3269,49152-65535" netsh advfirewall firewall add rule name="开放共享和域的UDP端口" dir=in action=allow protocol=UDP localport="53,88,123,135,137-139,389,445,464" netsh advfirewall firewall add rule name="开放打印机TCP端口" dir=in action=allow protocol=TCP localport="9100-9102,9220-9222,9280-9282,9290-9292" netsh advfirewall firewall add rule name="开放打印机UDP端口" dir=in action=allow protocol=UDP localport="105,5353" netsh advfirewall firewall add rule name="关闭危险TCP端口" dir=in action=block protocol=TCP localport="593,1025,1720,3001-3003,3095-3097,11211" netsh advfirewall firewall add rule name="关闭危险UDP端口" dir=in action=block protocol=UDP localport="11211" netsh ipsec static delete all rem 删除IP安全策略中的所有的策略、规则、筛选器列表、筛选器、筛选器动作等 netsh ipsec static add policy name=IDC数据中心安全策略 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=593 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1720 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1025 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3001 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3002 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3003 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3095 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3096 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3097 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filteraction name=阻止 action=block netsh ipsec static add rule name=关闭端口 policy=IDC数据中心安全策略 filterlist=关闭端口 filteraction=阻止 netsh ipsec static set policy name=IDC数据中心安全策略 assign=y echo 请手动检查:网络设置-网卡属性-Internet协议版本4(TCP/IP4)-高级-WINS-启用TCP/IP上的NetBIOS echo 正常情况下NetBIOS默认是启动状态 echo 加入域环境所需要的端口已开启,请手动将本机加入到您的域环境中 echo 请按任意键返回主菜单… pause>nul goto :wwwpiiscn :ADacceptip cls mode 110, 34 title 域环境安全加固 echo: echo 域环境安全加固【注意先后顺序,请先执行1次[1]再反复执行[2]】 echo ____________________________________________________________ echo: echo [1] 禁止外部访问本机域业务端口【执行1次即可,会清除所有授权】 echo: echo [2] 授权域成员IP能访问本机域业务端口【需先执行1次[1]】 echo: echo [3] 删除已授权IP访问本机域业务端口【IP已不在域中使用时】 echo ____________________________________________ echo: echo [0] 返回 echo ____________________________________________________________ echo: echo 请在键盘中输入菜单选项[1,2,3,0] choice /C:1230 /N if errorlevel==4 goto :wwwpiiscn if errorlevel==3 goto :ADacceptip3 if errorlevel==2 goto :ADacceptip2 if errorlevel==1 goto :ADacceptip1 :ADacceptip1 cls mode 110, 34 title 设置域环境中业务端口禁止外部访问 echo 设置域环境中业务端口禁止外部访问 netsh ipsec static delete all rem 删除IP安全策略中的所有的策略、规则、筛选器列表、筛选器、筛选器动作等 netsh ipsec static add policy name=IDC数据中心安全策略 netsh ipsec static add filterlist 关闭端口 netsh ipsec static add filteraction name=阻止 action=block netsh ipsec static add filterlist 许可端口 netsh ipsec static add filteraction name=许可 action=permit netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=88 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=135 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=137 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=137 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=138 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=138 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=139 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=139 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=445 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=445 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=389 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=464 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=593 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=636 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=860 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1720 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=1025 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=2049 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=2049 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3001 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3002 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3003 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3095 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3096 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3097 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3260 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3261 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3262 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3263 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3264 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=3265 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add filter filterlist=关闭端口 srcaddr=any dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=11211 netsh ipsec static add rule name=关闭端口 policy=IDC数据中心安全策略 filterlist=关闭端口 filteraction=阻止 netsh ipsec static add filter filterlist=许可端口 srcaddr=127.0.0.1 dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=80 rem 建立上面这条许可规则是为了增加筛选列表,后面会删除这条规则 netsh ipsec static add rule name=许可端口 policy=IDC数据中心安全策略 filterlist=许可端口 filteraction=许可 netsh ipsec static set policy name=IDC数据中心安全策略 assign=y netsh ipsec static delete filter filterlist=许可端口 srcaddr=127.0.0.1 dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=80 rem 删除前面建立的一个辅助规则 echo: echo: echo 已禁止本机域业务端口外部访问 echo 请尽快授权域成员IP访问本机的域业务端口 echo 在域成员全部服务器上都需要授权除自身IP外的成员IP能访问 echo 请按任意键去授权域控和域客户机的IP能访问业务端口… pause>nul goto :ADacceptip :ADacceptip2 cls mode 110, 34 title 授权域控和域客户机的IP能访问业务端口 echo 授权域控和域客户机的IP能访问业务端口 echo 在域成员全部服务器上都需要授权除自身IP外的成员IP能访问 echo 请在域控机和域客户机将域成员IP加入进来,每次输入一个IP set /p acceptip=请输入域控和域客户机的IP并按回车(每次输入1个IP): for %%i in ( 88 135 137 138 139 445 389 464 636 860 2049 3260 3261 3262 3263 3264 3265 ) do netsh ipsec static add filter filterlist=许可端口 srcaddr=%acceptip% dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=%%i && netsh ipsec static add filter filterlist=许可端口 srcaddr=%acceptip% dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=%%i echo: echo: echo 已授权%acceptip%访问域业务端口 echo 请在域控机和域客户机反复操作将域成员的IP加入进来 echo 在域成员全部服务器上都需要授权除自己IP外的成员IP访问 echo 请按任意键再次授权域控和域客户机的剩下IP能访问业务端口… pause>nul goto :ADacceptip :ADacceptip3 cls mode 110, 34 title 删除已授权IP访问域业务端口 echo 删除已授权IP访问域业务端口 echo 除非此IP已经不在域成员中使用,否则请不要删除 set /p acceptip=请输入需要删除的授权IP并按回车(每次输入1个IP): for %%i in ( 88 135 137 138 139 445 389 464 636 860 2049 3260 3261 3262 3263 3264 3265 ) do netsh ipsec static delete filter filterlist=许可端口 srcaddr=%acceptip% dstaddr=me protocol=TCP mirrored=yes srcport=0 dstport=%%i && netsh ipsec static delete filter filterlist=许可端口 srcaddr=%acceptip% dstaddr=me protocol=UDP mirrored=yes srcport=0 dstport=%%i echo: echo: echo 已删除%acceptip%访问本机域业务端口 echo 除非此IP已经不在域成员中使用,否则请不要删除 echo 如果错误删除IP,再次加入即可 echo 请按任意键返回… pause>nul goto :ADacceptip |
迅恒运营的IDC数据中心机房介绍
| 机房名称 | 机房介绍 | 是否推荐 |
|---|---|---|
| 广州较场西路机房 | 中国电信5星级机房,华南骨干出口,广州市中心机房,交通便利,总带宽200G,为华南骨干出口。 |  |
| 广州人民中路机房 | 中国电信3星级机房,超高速的20Gx2主备双线路带宽直接接入ChinaNET骨干层。 | |
| 广州天河科技园机房 | 天河软件园建中路4号,中国互联网应急中心机房,国家政府机关直属。多线接入骨干BGP线路。 | |
| 电子商务部广州机房 | 天河软件建业路上(科韵路)的国际电子商务中心大厦甲级写字楼内,机房环境一流。多线接入骨干BGP线路。 | |
| 广州电信加速器机房 | 位于广州市萝岗区开源大道1号企业加速器B1栋一楼,按照国际T3+及国标B+级标准建造，机房环境一流。多线接入骨干网。 | |
| 广州移动旗锐机房 | 广州科学城南翔二路1号旗锐数字科技园区内，属于第三方私立机房,现由移动运营，从粤西汇聚节点直连CMNET骨干网。 | |
| 广州移动南方基地机房 | 中国移动广州南方基地机房位于广州市天河软件园高塘大道333号,用于移动骨干网线路，是移动服务器托管优质机房。 | |
| 东莞电信道滘机房 | 中国电信4星级机房,总带宽320G,可提供电信和多线BGP线路,华南骨干机房,稳定高速,性价比高。 | |
| 东莞电信东城机房 | 中国电信4星级机房,总带宽320G,性价比高,可提供电信和多线BGP线路和200G集群硬件防火墙VIP防护。 | |
| 东莞电信樟木头机房 | 中国电信4星级机房,总带宽320G,可提供电信和多线BGP线路和100G集群硬件防火墙企业级防护。 | |
| 深圳互联港湾机房 | 深圳南山高新区中区软件大厦四楼，电信3星级机房，20G带宽接入骨干网络。 | |
| 深圳南山科兴机房 | 位于深圳市南山区科技园科苑路15号科兴科学园，3星级机房，可提供双线接入等业务。 | |
| 深圳百旺信机房 | 深圳市南山区西丽松白公路百旺信工业区A区(一区)一栋属于第三方机房，可提供双线接入等业务。 | |
| 佛山电信信息大厦机房 | 佛山市汾江南路35号电信佛山分公司信息大厦8-9层,是中国电信3星级机房,可提供双线接入等业务。 | |
| 中山电信火炬机房 | 机房位于中山市火炬区康乐大道47号电信3楼,是中国电信3星级机房,可提供双线接入等业务。 | |
| 江苏徐州电信机房 | 机房位于江苏徐州市新城区镜泊东路4号,徐州市档案馆东侧，是中国电信3星级机房,可提供双线接入等业务。 | |
| 江苏常州电信机房 | 机房位于江苏省常州市清凉路108号常州信息港，是中国电信4星级机房,可提供双线接入等业务。 | |
| 香港TKO机房 | 机房靠近香港交易所的数据中心位置和香港商业中心，拥有PCCW、GTT、Cogent、Telia、TATA、CT、CN2、CU线路。 | |
| 香港将军澳机房 | 机房在香港新界將軍澳工業邨駿昌街22號，与阿里云香港机房同属一栋楼，拥有多种线路接入。 | |
| 香港新世界机房 | 香港新世界机房的海底电缆系统遍布全球，能直接连接多个国家，免备案，服务器租用、云服务器等业务。 | |
| 香港NTT机房 | 香港NTT电讯机房，是一座专用数据中心，在香港大埔，免备案，提供服务器租用、VPS云服务器等业务。 | |
| 美国洛杉矶机房 | 位于美国洛杉矶，直连全球，是全球带宽最集中的地方，是外贸企业首选，该机房只提供服务器租用业务。 | |
| 美国加州DCS机房 | 位于美国加州，直连全球，是美国的华人机房，是外贸企业首选，该机房只提供服务器租用业务。 | |
| 美国圣何塞机房 | 位于美国圣何塞，紧邻科技中心-硅谷，直连全球，是外贸企业首选，该机房只提供服务器租用业务。 | |
| 韩国首尔KT机房 | 韩国首尔的江南区道谷洞数据中心，光纤直连电信(CN2)、移动、PCCW、NTT等网络核心骨干。 | |
| 台湾中华电信机房 | 台湾中华电信机房位于台湾台北市114内湖区瑞光路68号3楼，是台湾对外最重要的电信枢纽之一。 | |
| 菲律宾PLDT机房 | 菲律宾PLDT机房拥有PCCW、TATA、CT、CN2等线路接入，优化线路到中国大陆速度快，延迟低，网络稳定。 | |
迅恒十多年IT企业和IDC运维经验为您提供优质服务
迅恒专注网站建设10多年，几十人技术团队，品质卓越，服务有保障！
-
云虚拟主机
¥99元/年起 网站空间 原价：199元
-
独立物理服务器
¥488/月起 物理机 原价：699元
-
网站建设
¥580起 企业建站 原价：1999元起
迅恒建站·ABOUT US
迅恒专注于企业建站，海量精美网站风格模板供您选择！
迅恒是一家充满朝气蓬勃的互联网公司，坐落于羊城广州，拥有先进的管理理念，专业的技术团队。专注网站建设，为广大企业提供一站式企业建站服务。
01
- 全网品牌建站
帮您塑造行业品牌/企业品牌/产品品牌，快速缔造品牌美誉度
02
- 快速广泛传播
通过营销策划传播，快速提升网络知名度及曝光度
03
- 充分信任于你
通过对企业平台软硬实力深度包装，塑造公信力，让客户更信任你
04
- 高效转化成交
完善网站业务逻辑及在线客服沟通体系，快速提升询盘率及成交转化率
建站流程·PROCEDURE
网络营销推广的第一步就是做一个属于自己的网站
沟通联系
提出需求，咨询报价
达成协议
交流达成详细建站协议
支付费用
支付建站相关费用
建站开发
根据客户需求，制作网站
验收
客户验收网站
提交上线
验收合格，解析域名上线
售后服务
一对一的售后服务客服我们的优势·OUR STRENGTHS
做网站，为什么要选迅恒建站？
技术团队
专业的设计团队、技术团队，为客户提供专业的技术服务支持
源码交付
客户查验合格，提供源码交付/FTP信息。网站商业授权，避免产权纠纷
四合一建站多终端展示
网站能够在CP+平板+手机+小程序 完美响应展示。
无隐形收费
所有收费项公开透明，正规签订合同，合同清楚明确
高端设计
提供网站个性化定制设计，拒绝千篇一律
安全稳定
我司与华为云/腾讯云长期合作，采用安全稳定服务器，保障网站安全稳定运行
迅恒累计为上万网站稳定运行 100000000秒
机房接入电信带宽400G、联通带宽200G、移动带宽100G，直连核心骨干网络；
所有重要网络节点和核心设备均采用华为电信级交换设备，网络总体交换能力高达684G，网络联通率达到99.99%，
并且多点冗余备份，提高网络性能，避免单点故障。
所有重要网络节点和核心设备均采用华为电信级交换设备，网络总体交换能力高达684G，网络联通率达到99.99%，
并且多点冗余备份，提高网络性能，避免单点故障。
